产品用途Purpose:
电池针刺试验机通过针刺试验检验电池的安全性能，通过实时试验数据(如电池电压、电池表面最高温度、压力视频数据进行实验结果判定)针刺试验结束后电池应不起火，不爆炸、不冒烟;也是各电池厂家及研究所必不可少的检测设备。
产品特点 Product Feature
Qc743老标准要求:
用直径@3mm~8mm的耐高温钢针、以IOmm/s~40mmls的速度，从垂直于蓄电池模块极板的方向贯穿至少三个蓄电池单体(钢针停留在蓄电池中)
QC743新标准要求:
用6mm-o10mm的耐高温钢针(针尖的角度为60度，针的表面光洁、无锈蚀、氧化层及油污)、以20~30mm/s的速度，从垂直于蓄电池极板的方向，直至贯穿3个单体蓄电池(钢针停留在蓄电池中。试验后观察1h)
QC743 Old Standard Requirement:
With diameter o3mm-8mm high temperatureresistant steel needle, lOmmls~40mms speed, penetrate at least three storage battery monomer from vertical direction of store battery module pole board(steel needle stay in the storage battery)
QC743 New Standard Requirement:
With diameter 6mm-o10mm high temperature resistant steel needle(the angle of needle point is 60 degree, needle surface firish, no corrosion,oxidelayer and oilstin).20mmls-3Ommls speed,from vertical direoction of store battery module pole board, penetrate till hree monomer storage battery(steel needle stay in the storage battery, observe 1h after test)
标准依据 Standard Basis
GB/T 18332.2-2001电动道路车辆用金属氢化物镍蓄电池
QC/T 743电动汽车用锂离子蓄电池
QC/T 744电动汽车用金属氢化物镍蓄电池 汽车动力电池的相关标准国际标准(ISOIIECISAE/JEVA/CEN等)、国际标准协会及"863计划"电动汽车重大专项相关测试规范
QB/T2947.3-2008电动自行车用蓄电池及充电器第3部分
DBI2/T246-2005电动自行车锂电池测试标准
GB 19521.11-2005锂电池组危险货物危险特性检验安全规范
GB/T31485-2015电动汽车用动力蓄电池安全要求及试验方法
GB/T31486-2015电动汽车用动力蓄电池电性能要求及试验方法
GB/T31467.3-2015电动汽车用锂离子动力蓄电池包和系统测试规程
GB/T 18332.2-2001 Nickle metal hydride storage battery for electric road vehicle
QC/T743 Lithium ion storage battery for electric vehicle
QC/T744Vehicle power batlery revelant international standards of nickle metal hydride storage battery for electric vehicle(SOVIECISAEUJEVACENetc).international standard association and "863 plan" electric vehicle major specific revelant test specification
QB/T2947.3-2008 Part 3 storage and charger for electric bicycle
DB12/T246-2005 Electric vehicle lithium battery test standard
GB 19521.11-2005Lithium battery pack dangerous goods dangerous property inspection safety specification
GB/T31485-2015 Power storage battery safety requirement and test method for electric vehicle
GB/T31486-2015 Power storage battery safety requirement and test method for electric vehicle
GB/T31467.3-2015Lithium ion power storage battery pack and system test procedure for electric vehicle
产品规格Product specifications
| 设备型号Equipment model | 测试空间Test space(mm) | 设备外形尺寸Machine External Dimension |
| RL-DZC-2T | 200×200x200 | W750xD650xH1800mm |
| RL-DZC-5T | 600x600x600 | W1000xD900xH2200mm |
| RL-DZC-9002D | 800x800×800 | W3000xD1200xH1300mm |
| RL-DzC-9002T | 1000x1000x1000 | W3300xD150OxH1500mm |
辅助功能 Accessibility Function | 电压、温度采集、视频监控系统、灭火系统、安全防爆系统、烟雾排放系统、烟雾过滤系统 Voltage,Temperature acquisition,Camera monitoring system,Sprinkler system, Safety explosion proof system,Smog emission system, Smog filter system |
针刺速度Nail Penetrating Speed | 0~80mm/min（可调），可按要求定制到200mm/min 0~80mm/min (Adjustable )，Can customize to 200mm/min according to requirement |
测试空间(mm)Test Space | 200x200x200mm、500x500x500mm、800x800x800mm、1000x1000x1000mm(可按要求定制) Can customize according to requirement |
外形尺寸External Dimension | 依实际设计为准Subject to actual design |
选 配 指 标 | | 电压选择Voltage Select | 0-10V,0-100V,0-1000v | | 温度采集范围Temperature Acquisition Range | 0~1200°℃ | | 电压、温度精度Accuracy of voltage and temperature | ±1%FS | | 电压分辨率Voltage Resolution | 1mv | | 温度分辨率Temperature Resolution | 0.1C |
|
主 要 技 术 指 标 | | 速度Speed | 0~80mm/min（可调），可按要求定制到200mm/min 0~80mm/min ( Adjustable ) , can customize to 200mm/min according to requirement | | 针刺行程Nail Penetrating Stroke | 0~1000mm范围内可选0~1000mm range optional | | 结构 Structure | 立式、卧式(可根据实际尺寸选择)Vertical/Horizontal type(choose according to actual dimension) | | 耐高温钢针规格High Temperature Resistant Steel Needle Specification | 直径中3mm~$8mm/Diameter $3mm~8mm | | 针刺方式Nail Penetrating Method | 横向、纵向Landscape orientation,Portrait | | 针刺变形量Nail Penetrating Deformation Amount | 无（如需要有则可选电脑控制）No (if need,please choose computer control type) | | 针刺保持时间Nail Penetrating Holding Time | 0~99小时99分99秒/0~99 Hour 99 Minute 99 Second | | 驱动方式 Driving Method | 液压Hydraulic | | 针刺速度精度Accuracy of Nail Penetrating Speed | ±0.1mm/s | | 力量精度Force Accuracy | ±1% |
|
结 构 | | 箱体Chamber Body | 立式或卧式结构与控制部分分开Vertical/ Horizontal type,apart with control part | | 通讯 Communication | 无（如需要有则可选电脑控制）No (if need,please choose computer control type) | | 耐高温钢针 High Temperature Resistant Steel Needle | 直径中3mm~$8mm,可按要求定制Diameter o3mm~8mm,can customize by requirement | | 数据采集模块Data Acquisition Module | 独立远程采集隔离，多路电压、温度、电流采集通道、确保数据无误Independent remote acquisition and isolation,multiplex voltage, temperature, current acquisition channel, ensure data correct(optional) | | 通道数量标配Channel Quantity Standard Configuration | 2通道、4通道、8通道，多种数据采集系统（选配）2channel,4channel,8 channel,multiple data acquisition system(optional) | | 摄像监控系统 Camera Monitoring System | 测试区域装配高清摄像监控系统，并可远程控制，具有防爆功能（选配）Test area install high definition video monitoring system,can remote control, explosion proof function(optional) |
|
| 标准配置 Standard Configuration | 针刺主机1套,控制柜1套，直径v3mm~u8mm耐高温钢针1套Nail penetrating main body one set,control cabinet one set,diameter u3mm~u8mm high temperature resistant steel needle one set |
| 测试夹具Test Clamp | 特定制作，根据样品实际使用条件而定Specific production,customize by sample actual usage condition |
| 电源电压Power Supply | AC380V 50HZ三相五线制AC380V 50HZ three phases five wires |
| 使用环境 Usage Environment | 0°C~45°℃ |