Electrical wire is sheathed in metal fire-retard tube, to prevent ignition caused by fire in batterytest.
Compression force can be set from 250N to 13KN, as per requirement in specific standard.
Equipped with test hole and tuyere;Through tuyere and fan,exhaust gas is cleared out,and
pressure equalized rapidly; Through Test hole, temperature and air pressure in test area can be measured easily.
Controller device is detached from test chamber;As a safety measure，the equipment is operated 1-2 meters from the test chamber.
标准依据Standard Basis
MT/T 1051-2007《矿灯用锂离子蓄电池-挤压试验》
uL1642安全标准《压缩测试》
uL 2054安全标准《压缩测试》
GB/T 2900.11-1988矿灯用锂离子蓄电池安全性能检验规范《挤压》
YD 1268-2003移动通信手持机锉电池及充电器的安全要求《耐挤压性能》
sJ/T 11169-1998锂电池标准《挤压试验》
GB/T 8897.4-2002原电池第4部分肛电池的安全要求《挤压》
SJ/T11170-1998家用及商用电池安全标准《挤压》
DB 032-2009通信用后备式锂离子电池组《抗挤压》
QB/T 2502—2000锂离子蓄电池总规范《挤压(内部短路)试验》
MTT 1051-2007 Compression test:Lithium-ion batteries for miner lamp;
UL1642 Compression test of Standard for Safety;
UL 2054 Compression test of Standard for Safety;
GB/T 2900.11-1988 Compression, safety inspection of lithium-ion batteries for miner lamp;
YD 1268-2003 Compression-resistance performance, safety requirement of batteries and chargers for mobile handset,
SJ/T 11169-1998 Compression test of lithium-ion battery standards;
GB/T8897.4-2002 Compression, safety requirement for lithium-ion in part 4, galvanic battery;
SJ/T11170-1998 Compression, safety standard for household and commercial batteries;
YDB 032-2009 Compression resistance, lithium-ion battery for communication;
QB/T 2502—2000 Compression test(internal short-circuit), general specification of lithium-ion batteries;