型号Model

RL-280XD

RL-800XD

RL-1200XD

工作室尺寸(WxHxD)

Workshop Size(mm)

600x800x600

900x900x900

1000x1200x1000

温湿度范围

Temperature and

Humidity Scale

1.黑板温度(辐照溫度):40〜1101冷凝温度范围iRT+KTC-ICKrC;   2.湿度范围:85%〜98%(±   3%R.H);(可选加装压缩机除

湿，湿度范围20~98 o /〇R.H) 1.the blackboard temperature (irradiation temperature): 40 〜110   e C; condensation temperature

range: RT + 10 °C 〜100 °C; 2, humidity range: 85% 〜98% (plus or minus 3% R.H); (optional add compressor dehumidification，

humidity range is 20 〜98% R.H).

主要技术参数

Main Technical

Parameter

氙弧灯功率：

2KW风冷适用于RL-280XD型;2.5KW风冷:适用于RL-800XD型；6KW水冷:适用于RL-1200 XD型

1)风速:衾1.5m/s; 2)总辐射强度:1150±10%w/m2; 3)试样架转速:0.75〜1.25r/min(可调),360。旋转样品架，旋转台分为上

中下三层，每层样品架尺寸210mm,每层样品架内安装测试样品尺寸为：210mmx70mm; 4)降雨时间：0~99分钟可调；5)光

源：风冷式氙弧灯；6)氙灯功率：2Kw, 2.5Kw,6Kw; 7)控制系统：专业版温湿度辐照度氙灯控制器；8)设备特点：具有光照、淋

雨、温度、湿度、等气候条件；9)福射强度：500W/m2〜1100W/m2; 10)波长：350-850nm

Xenon arc lamp power: 2 kw air-cooled is suitable for RL-280XD type; 3.3kw air-cooled is suitable for RL-800XD type;

6 kw water is suitable for RL-200 XD type: 1)The wind is 1.5 m/s, 2) Total radiation strength is 1150 + 10% w/m2; 3) Sample frame

speed is 0.75 — 1.25「/min (adjustable), 360 rotating sample frame, rotary table is divided into 3 three layers, each layer sample frame

size is 210 mm, each layer samples within the framework of the installation test sample size is 210 mm x 70 mm;4) rainfall time: 0 ^ 99

minutes adjustable; 5)light source: air-cooled xenon arc lamp; 6) xenon lamp power: 2 kw, 3.3 kw, 6 kw; 7)cx>ntrol system: pro

temperature and humidity irradiance xenon lamp controller;8) characteristics of the equipment: with illumination, get wet in the rain,

temperature, humidity, and climate conditions, 9)radiation intensity: 500 w/m 2 ^ 1100   wfm 2 m 2 \ 10)wavelength: 350-850 nm

结构与材质

Structure and Material

1.内箱材质：SUS304#不锈钢板；2.外箱材质：冷扎钢板外观烤漆处理或SUS304#不锈钢板（可选择）；3.加热器：镣洛合

金_片式发热管.1.the inner box Material: SUS304 # stainless steel plate; 2. exterior material: cold rolled steel exterior

paint handling or SUS304 # stainless steel plate (optional) 3. Heater: Scale alloy of nickel Los heat pipe.

送风循环系统

Air Circulation System

1.专用电机；2.多翼离心式专用风轮；3.循环方式：空气循环

1. special motor; 2.many wing centrifugal special wheel; 3.circulation ways: air circulation

加湿系统

Humidification System

1.加湿方式:电热蒸气式加湿;2.加热方式：SSR固态继电器无触点加热；3.供水方式：泵式供水；4.湿度传感器：Pt100; 5.溫度传感器：

Pt100; 6.水位控制：台湾进口液位器；7.水位计：透明石英玻璃水位器；8.水箱：内笛固定式水箱20L. 1. humidification way：

electric steam type humidifying; 2. heating mode: SSR solid state relay contactless heating; 3. water supply way: pump water

supply; 4. humidity sensor: Pt100; 5. the temperature sensor: Pt100; 6. water level control: Taiwan imported level device; 7.

water level gauge： transparent quartz glass water apparatus; 8. water tank: built-in fixed cistern 20L.

保护系统

Protection System

1.超温保护；2.欠逆相保护；3.缺水保护；4.过载保护；5.漏电保护；6.超压

1. Over temperature protection; 2. reserve phase protection; 3. water depletion protection; 4.overload protection; 5. leakage

protection; 6, overpressure protection

备注Note

可根据产品形状大小不同订做非标机型Order non-standard machine according to product size

电源Power

AC380V.50/60HZ