冷热冲击试验机

  • 产品详情
  • 产品参数

冷热冲击试验机,用来测试材料结构或复合材料,在瞬间下经极高温及极低温的连续环境下所能忍受

的程度,藉以在最短时间内试验其热胀冷缩所引起的化学变化或物理伤害。适用的对象包括理电池、

金属、塑料、橡胶、电子”二等材料,可作为其产品改进的依据或参考。

Cold & thermal impact tester is used to test the capability of material structure or composite materials to withstand

the continuous environmental changes between extremely high temperature and low temperatures during a short

period, and therefore understand the chemical changes or physical damages caused by expansion from heat and

contraction from cold in the shortest possible time. It is applicable to Lithium-ion battery,metals, plastic, rubber,

electronics amongst other, Lithium-ion battery. The test result can be used as a reference or basis for product

improvement.

特点Features

.三箱设备区分为:高温区、低温区、测试区三部分,测试产品置于测试区,冲击时高温区的温度冲压入测试去进行冲击,测试产品为静态式。

.采用触控式图控澡作介面。操作筒易。

.冲击方式应用风路切换方式将温度导入测试区,做冷热冲击洲试。

.高温冲击或低湿冲击时,最大时间可达999H,最大循环周期可达9999次。

.系统可作自动循环衙移或手动选择性冲击并可设定二区或三区冲击及冷冲热冲启始。

.冷却采二元冷冻系统,降湿效果快速,冷却方式为水冷式。

.可以试验冲击常温

Divided into three areas:high temperature,low temperature, the three-part test area,   testing products placed on the

test,when the impact of high temperature or cold temperatures into the area of impact testing area

Using touch-control graph control as operation interface, easy to operate.

Applying wind route conversion to the shock method to distribute temperature to the testing zone for cold and thermal

shock measurement.

For high temperature shock or low temperature shock,ma x i mum time is up to 999H,and maximum circulation cycles

are 9999 times.

The system can be used fo r automatic Circulation Shock or manual selective shock, capable of setting two zones or

three zones shocks as well as cold and thermal shock start-up.

Binary cooling system is adopted for cooling,with quick cooling effect.The method is water cooling.

Normal temperature shocd test is allowed.

技术参数

型号Model

RL-I-42(A-C)

RL-I-80(A-C)

RL-I-100(A-C)

RL-I-150(A-C)

RL-I-252(A-C)

RL-l-450(A-C)

内部尺寸WxHxD(cm)

40x35x40

50x40x40

50x45x45

60x50x50

70x60x60

80x75x75

外部尺寸WxHxD(cm)

140x185x145

150x193x153

150x195x160

160x220x185

175x212x197

190x227x221

温度范围

Temperature Range

(150t-A:-45C;B:-55 C;C: 65t);(高温区High temperature zone :+60℃一+1500:低温区Low temperature zone:-10C--65C)

升温时间(蓄热区)

TeatingTime (regenerative)

RT-200℃约需(about)35min

降温时间(蓄冷区)

Cooling Time (storage)

RT--70℃约需(about)55min

温度回复时间/转换时间

Temperature Response Time Change

_5min /<5sec

温度控制摘度/分布精度

土0.5C/12.5%C

内外部材质

外箱为SUS304#不锈钢表面条纹处理,内箱SUS 304#为不锈钢

The external box is the SUS304# stainless steel surface strips,the inner box is SUS304# stainless steel.

保温材质

耐高温高密度硅酸铝纤维棉或PU发泡胶绝缘体材料

Heat-resistance high-density aluminum silicate fiber cotton or PU foam insulator materials

系统

P.I.D+S.S.R+微电脑平衡调温控制系统

P.I.D+S.S.R+Micro-computer balanced temperature control system

冷却系统

半密闭式双段压缩机(水冷式)/全密闭式双段压缩机(风冷式)

Saemrnermeuc aouoie-stage compressor twater-cooiea type) irmermeuc aouoie-stage compressor Lair-cooiea type,

保护装置

无熔丝开关、压缩机高低压保护开关、冷媒高压保护开关、故障警告系统、电子警报器

Non-fuse breaker high and low.

Pressure protective switch of the compressor, refrigerator high-pressure protective switch, failure warning system,electronic alarm

配件

观窗口(特殊选购型)、上下可调隔层两片、通电测线孔、脚轮、水平支架

Viewing window (special order),shelves(freely   adjustable,2pcs),power-on test cable port,castor,horizontal support

压缩机

法国“泰康”牌France's "Tecumseh" Brand

电源

AC380V 50HZ/6HZ3

控制器

韩国TEMlKorea TEMl 或日本OYO牌Japan s OYO Brand任选Optional

重量

700Kg

900Kg

1100Kg

1200Kg

1400Kg

1900Kg

压缩机

法国“泰康”牌France/s   Tecumseh Brand 德国比泽尔Germanys


类别
冷热冲击试验机